Abbott CELL-DYN 3200 - Installation Procedures and Special Requirements; Overview; Initial Preparation

CELL-DYN
®
3200 System Operator’s Manual
2-1
9140181H—October 2001
Section 2 Installation Procedures and Special Requirements
S
ect
i
on
2
Insta
ll
at
i
on Proce
d
ures an
d
S
pec
i
a
l
Requ
i
rements
Overview
Installation of the CELL-DYN 3200 should be performed by an authorized Abbott
representative to ensure that all system components are functioning correctly and
to verify system performance.
NOTE: Installation of the Analyzer by an unauthorized or untrained person could
result in damage to the system. Never attempt to install the system without
an authorized Abbott representative present.
The remainder of this chapter gives general requirements for a successful
installation. Procedures are also included for installing the Printer and Sample
Loader.
Initial Preparation
Package Inspection and Inventory
The instrument is shipped from the factory as follows:
CELL-DYN 3200SL
• 1 crate containing the instrument including Sample Loader
• 1 box containing the CELL-DYN Accessory kit and Sample Loader
Accessory kit
• 1 box containing the Color Graphics Printer
• 1 box containing the Ticket Printer (optional)
• CELL-DYN Reagents
• CELL-DYN Operator’s Manual
CELL-DYN 3200CS
• 1 crate containing the instrument
• 1 box containing the CELL-DYN Accessory Kit
• 1 box containing the Color Graphics Printer
• 1 box containing the Ticket Printer (optional)
• CELL-DYN Reagents
• CELL-DYN Operator’s Manual