CELL-DYN
®
3200 System Operator’s Manual
14-37
9140181H—October 2001
Section 14 Reticulocyte Package
Levey-Jennings
Figure 14.20 The Reticulocyte Levey-Jennings Screen
The [LEVEY-JENNINGS] key is used to display the Levey-Jennings graphs of the
data in the QC Log. (See the preceding figure.) Up to 30 data points can be
displayed on the screen at one time. If there are more than 30 data points in the QC
Log, the [PREVIOUS 10] and [NEXT 10] keys can be used to scroll through the graphs.
The following soft key labels are displayed when the [LEVEY-JENNINGS] key is
pressed:
PREVIOUS 10 (This key is not displayed when the first 10 data
points are displayed.)
NEXT 10 (This key is not displayed when the last 10 data
points are displayed.)
PRINT
RETURN
The [PRINT] key is used to print the Levey-Jennings graphs.
The [RETURN] key is used to return to the VIEW RETIC QC LOG screen.
RETIC LEVEY-JENNINGS
Ready
Mar 21 2001
Operator ID
Retic Seq#
17:16
R0060
ACS
PREVIOUS
10
NEXT
10
RETURNPRINT
QC File: FILE 1
Seq num: R7 TO R50
WESTGARD RULE WARNINGS
To Next Page
Loading...
