14-56
CELL-DYN
®
3200 System Operator’s Manual
9140181H—October 2001
Reticulocyte Package
Routine Operation
Section 14
Upper Right Corner
The upper right-hand corner of the RETIC RUN RESULT screen displays the
following information:
• The current date and time.
• The Operator ID (which identifies the current operator).
• The Reticulocyte Sequence Number. ("R _ _ _ _ ," which automatically
increments as reticulocyte samples are run.)
Center
The center section of the RETIC RUN RESULT screen displays the results. The list of
the parameters and results is displayed on the left side. The information on RBC
value entry is also displayed on the left side. The scatterplots, and the histograms
are displayed on the right. The red blood cells are shown in red, the reticulocytes
are shown in blue, the nucleated cells are shown in white (black on the color
printout), the immature Reticulocytes are shown in cyan (light blue), and
coincidence passage events are shown in green and the noise is shown in yellow.
Any alert messages will appear in the lower left-hand corner of the screen.
The following soft key labels are displayed on the RETIC RUN RESULT screen:
NEXT RETIC (This soft key label displays when the Reticulocyte
specimen run has been completed.)
PRINT REPORT/
COLOR PRINT (The key label alternates between the selections)
RETIC MAIN (This key is used to return to the RETIC SPECIMEN
TYPE screen.)
To Next Page
Loading...
