Abbott CELL-DYN 3200 - Page 69

CELL-DYN
®
3200 System Operator’s Manual
1-21
9140181H—October 2001
Section 1 Use or Function
The floppy disk drive is used to update the software program and to download data.
The hard drive is used to store the User Interface Software and Patient Data Log.
It has sufficient capacity to store the most recent 10,000 cycles, including numeric
and graphics data.
Printed Circuit Boards
A set of Printed Circuit Boards constitutes the measurement and control
electronics for detection, amplification, and processing of signals.
PC Keyboard Connector
The PC Keyboard Connector port is used to connect the standard computer
keyboard.
LIS (Laboratory Information System) Connector
Two serial ports are provided. COM1 is used to connect the Laboratory
Information System to the Data Module. COM2 is unused.
Analyzer BDM Diagnostics (Unused)
HSSL (High Speed Serial Link) Connectors
The High Speed Serial Link transfers data between the Analyzer and the Data
Module. The HSSL Connector on the Data Module connects to the HSSL
Connector on the back panel of the Analyzer.
Membrane Keypad Interface Connector
The Membrane Keypad Interface Connector allows data to be sent from the
Membrane Keypad on the Display Monitor to the Data Module.
Display Station Interface Connector
The Display Station Interface Connector allows data to be sent to the monitor
and data to be received from the Membrane Keypad (Soft Keys) on the Display
Station.
Ticket Printer Connector
This port is used to connect the printer cable when the printer is used to print data
in a ticket format.
Graphics Printer Connector
This port is used to connect the printer cable when the printer is used to print data
in a graphics format.