Chapter 5. Inventory
If an item has quantity breaks, the price will print next to the quantity with a “Q”
preceding it. The value in the
Price column for Price Adj 6-9 are only displayed and
can be changed by selecting
Price Adj 2-5. There are additional fields displayed on
the screen:
XXX% (Far right column). Gross margin percent based on the
cost selected in Step 5 above (average, last, market, or
list/base).
T: (Lower half). Item type.
Fact: (Lower half). Conversion factor.
Rnd: (Lower half). Rounding flag from IM1.D.
9 Repeat Step 8 for each selected field. The cursor stops automatically for you to
make an entry.
10 When all selected fields have been entered, the computer asks at the bottom of the
screen:
<Ent>=Accept Change <Esc>=Reject Change
Press Enter to accept the changes or press Esc to reject them.
11 Depending on the method of adjustment (manual or automatic), you are returned
to either Step 7 to select another item to change
or the next item is displayed
automatically in Step 8. Continue making changes as needed.
12 When done, press Esc until you return to the
INVENTORY MENU.
Steps 13-21: Copy from Field to Field
Use this option to move the value in any field in IM2 to any other field in IM2 for
a range of item numbers. These instructions show moving List/Base to Average
Cost.
13 Starting at the
INVENTORY MENU, select 10 for Inventory Special Maintenance and press
Enter. Then select 2 for
Store Data IM2.
14 Select 11 for
Copy Field From/To Field IM2.
Dimensions 14 193
To Next Page
Loading...