Chapter 5. Inventory
15 The computer displays:
DS03911 Move Values DIM11 DATA Date mm/dd/yy
Rev8.0.1 Port 39
Store 01
Select Value To Move From: 0
Select Value To Move To :
1. New Price 8. Price Adj 1 17. Minimum
2. List/Base 9. Price Adj 2 18. Maximum
3. Average Cost 10. Price Adj 3 19. Beg Year Balance
4. Last Cost 11. Price Adj 4 20. Units On Hand
5. Market Cost 12. Price Adj 5 21. EOQ
6. Lifo Cost 13. Price Adj 6 22. Dollar Value
7. Count Cost 14. Price Adj 7 23. Before Count Units
15. Price Adj 8 24. Before Count Dollars
16. Price Adj 9 25. Count Units
26. Count Dollars
<Esc> = End
The cursor is at Select Value To Move From. From the displayed list of fields, enter the
number corresponding to the value you wish to move from (source). If you want to
use List/Base as the source, enter 2 and press Enter.
16
Select Value To Move To:
Enter the number corresponding to the value you wish to move to (destination). If
you want to move List/Base to Average Cost, enter 3 and press Enter.
17 The computer displays:
DS03911 Move Values DIM11 DATA Date mm/dd/yy
Rev8.0.1 Port 39
Store 01
1. Input Parameters
Beginning Item No 0
Ending Item No 99999999
Source Store Number 1
Destination Store Number 1
Select Optional Field (Y/N) N
The cursor is at Beginning Item No. Enter the first item number of the range of items
you wish to change. This must be the item number and not the catalog number.
) NOTE: If you want to change items within a certain group and/or section, enter the group/section
number followed by all zeroes. For example: to change group 72, section 3, enter
72030000.
18 Ending Item No
Enter the ending item number of the range.
) NOTE: To pick up all remaining items with the group/section of the example, enter 72039999.
19 Press Tab through the next 3 fields (Source Store Number, Destination Store Number,
Select Optional Field).
194 Dimensions 14
To Next Page
Loading...