Chapter 8. Point of Sale (POS)
SYSTEM MANAGER—2. PORT INFORMATION
1 From the System Manager Variable File Maintenance Menu, select 2 for Port Information.
2 The computer displays the System Manager Port Information Menu:
DSVM0702 System Manager Port Information DIM11 DATA Date mm/dd/yy
Rev11.0.2 Port 39
Store 01
Choose Selection:
+--------------------------+
| 1. Port Options |
| 2. Printer Assignments |
+--------------------------+
<Esc>=End
) NOTE: Port Options and Printer Assignments should be checked by your Implementation
Specialist. Because of the vast array of software options, hardware configurations, and
different operating systems, these entries are best set up by Dimensions for your initial
installation.
SYSTEM MANAGER—3. STORE NAME & ADDRESS
1 From the System Manager Variable File Maintenance Menu, select 3 for Store Name & Address.
2 The computer displays the System Manager Store Name/Address screen:
DSVM0703 Sys Mgr Store Name/Address DIM11 DATA Date mm/dd/yy
Rev8.1.1 Port 39
Store 01
1. Store Number 1
2. Store Name (short) STORE #1______________________
3. Store Name (long)
DIM10 STORE 1
4. Store Address 1
BOX 226
5. Store Address 2
RANDALL, MN 56475
6. Store Address 3
(612)-749-2721
<Esc>=Change Store <Tab>=Go Forward One Field (.)=End <F1>=Help
Check the displayed store number. Change if needed (press Esc to back up one
field. Enter the correct store number).
3 The entries are filled in. Make sure the responses are correct for the following
fields:
Name (long) 3. Store
Address 1 4. Store
Address 2 5. Store
6. Store Address 3
Enter up to 78 characters for each line of the store name and address. Store
Address 3
can be used for a phone and fax number, if desired. This name and the
358 Dimensions 14
To Next Page
Loading...