Optional equipment/accessories
DLT-V83 Operating Instructions V2.00 137 / 157
16.1.1. UPS Battery pack specification
Integrated UPS technical data
Bridging time The integrated UPS can bridge an interruption of the main
supply typically for 10 minutes.
Requirement: the UPS is fully charged.
Operating temperature -10 to +50 °C
Relative humidity 10% to 90% at 40 °C relative humidity, noncondensing
Mechanical vibration
and shock resistance
DLT-V8310 and DLT-V8312:
− Class 5M3 according to EN 60721-3-5
− US Highway Truck according to MIL-STD 810F
DLT-V8315:
− Class 5M2 according to EN 60721-3-5
−
US Highway Truck according to MIL-STD 810F
Charging time 2.5 h (fully recharge a completely discharged battery).
The 10 minutes bridging time becomes available again after
a charge time of approx. 60 minutes.
The UPS is automatically recharged when the main supply
voltage is applied.
Charging temperature 0 to +45 °C (internal device temperature)
Storage temperature -20 to +60 °C
Maximum output power 35 W
Input voltage 12 V
Output voltage Typically 12 V
Battery voltage 7.2 V
Battery capacity
Devices manufactured until calendar week 2 /2018:
2200 mAh
Devices manufactured since calendar week 3 /2018
and battery packs for replacement shipped since calendar
week 3 /2018: 2000 mAh
For your information: Find calendar week and manufacturing
year on the device type plate next to abbreviation “Mfd”.
To Next Page
Loading...
