Advantech-DLoG DLT-V8312 - USB Recovery Stick (Optional); Scanner and Scanner Bracket (Optional); Sun Visor (Optional); Protective Film for Touchscreen (Optional)

Optional equipment/accessories
142 / 157 DLT-V83 Operating Instructions V2.00
16.9. USB recovery stick (optional)
The optional Advantech recovery stick allows images to be backed up and restored onto the DLT-V83
when necessary (backup & recovery).
16.10. Scanner and scanner bracket (optional)
You can connect scanners to either the USB interface or the serial interface. If connected to COM1, the
scanner can be powered through the interface with a voltage of 5 V or 12 V (option).
Use only scanners that have been approved by Advantech.
Optional scanner brackets are available for the DLT-V83.
16.11. Sun visor (optional)
Fig. 16.7: DLT-V8312 with sun visor
Technical data
Material Aluminum, powder coated
Weight of sun visor DLT-V8310 300 g
Weight of sun visor DLT-V8312 357 g
Screws DIN912 M6x10 A2 TufLok
Washers DIN 1440-A6-A2
Tightening torque 10 Nm
16.12. Protective film for touchscreen (optional)
An optional protective film is available for resistive touchscreens. This film protects the touchscreen
during extreme use.