Advantech-DLoG DLT-V8312 - Prevent Damage to the Touchscreen; Operating the Resistive Touchscreen; Operating the PCT Touchscreen

Operating the device
DLT-V83 Operating Instructions V2.00 57 / 157
9.3.1. Prevent damage to the touchscreen
Information valid for all touchscreen types, resistive and PCT.
 Keep the touchscreen clean.
 To not touch the touchscreen with pointed, sharp, rough or hard objects, e.g. ball point pens, writing
implements, tools of any kind (e.g. screwdrivers).
 Prevent any kind of adhesive applied on the surface.
 Ensure that the screen surface is not influenced by high voltages or static electricity.
 Do not use excessive force when touching touchscreens, do not hit or press hard.
 Do not put the device down with the touchscreen facing down, if necessary, place a clean cloth
underneath.
9.3.2. Operating the resistive touchscreen
Operate the resistive touchscreen with:
− Clean, dry fingers.
− Clean, dry, soft gloves.
− Suitable touch stylus (plastic or wood, rounded tip).
9.3.3. Operating the PCT touchscreen
Operate the PCT touchscreen with:
− Clean, dry fingers.
− Clean, dry, thin gloves.
− Suitable touch stylus with capacitive (electrically conductive) tip.
NOTICE: Property damage
Water on the PCT touchscreen can be interpreted as a "touch" and lead to malfunctions.
Multi-touch capability
Depending on the installed operating system type, the PCT touchscreen of the DLT-V83 is multi-touch
capable. This means it can detect two touches simultaneously.