Functional description
DLT-V83 Operating Instructions V2.00 9 / 157
3.2. Mount, operate and service the device correctly
DLT-V83 Industrial Computers were designed and built according to modern technology and accepted
safety regulations.
However, the operation of the DLT-V83 can endanger personnel or third parties and cause damage to
the device and other material assets when, for example, the device is:
− installed incorrectly or configured improperly.
− operated by untrained or uninstructed personnel.
− improperly operated and maintained.
− not used as intended.
The owner/operator commitments with regards to safety (accident prevention regulations, occupational
safety) are to be followed.
3.3. Device identification / name plate
The name plate on the rear side of the DLT-V83 must be legible at all times.
Do not damage the name plate or remove it from the device.
Information on the labels on the device (examples):
− Model name, e.g. DLT-V8310, DLT-V8312, DLT-V8315
− Serial number
− FCC ID (Radio)
− Barcode for internal use only
To Next Page
Loading...
