General device configuration
DLT-V83 Operating Instructions V2.00 67 / 157
10.4. MS-Windows OS (optional)
10.4.1. Setting up MS-Windows
Pre-installed on flash
If a DLT-V83 with preinstalled operating system is placed into operation, this operating system will be
loaded after the BIOS system messages. System-specific device drivers (e.g. for graphics, sound,
network, touchscreen) are already installed.
In DLT-V83 units with a pre-installed operating system, the system is located on the C partition.
Installing on flash
When a DLT-V83 is started up for the first time without a pre-installed operating system, the user needs
to carry out a number of steps that will vary depending on the system to be installed. Refer to the
relevant operating system manual for specific instructions.
10.4.2. USB recovery stick
The optional Advantech recovery stick allows images to be backed up and restored onto the DLT-V83
when necessary (backup & recovery).
Please contact your Advantech sales representative if needed.
10.4.3. WES 7 and Win 7 Prof.: USB icon in the taskbar
Under WES 7 and Win 7 Professional, please observe:
Do not click on the Eject DLT-V83xx button, which fades in on the taskbar using the Eject Media
icon:
If the Eject DLT-V83xx button is clicked on:
− Malfunctions during the communication with the environment controller are possible.
− The operating system must be restarted.
To Next Page
Loading...
