WLAN configuration
DLT-V83 Operating Instructions V2.00 91 / 157
Available parameters in the Connection and Security sections:
Connection
Connect automatically when the
network is in range
Enable this parameter to set up an automatic
connection to the network.
Connect to a more preferred
network if available
In the event of multiple profiles being present, this
option can be used to select the preferred profile.
Connect even if the network is
not broadcasting its name (ssid)
This option can be used to set that a connection is still
established when the name of the network is not being
transmitted.
The security settings (Figure 11.17: Advanced Security Settings dialog ) must be adapted. These
settings differ depending on the network.
The Security Type must be selected first.
The following options are available:
− No authentication (Open)
− WPA2-Personal
− WPA2-Enterprise
− CCKM
The encryption process (Encryption Type) is then selected.
The options available here depend on the selected Security Type.
− None
− WEP
− AES
To Next Page
Loading...
