Setting Unit Minimum - Maximum Default/Advised
- Automatic - Manual. Automatic.
Changes the mode of the net tying process between automatic and manual operation.
-
Automatic - Manual. Automatic.
Changes the mode of the bale transfer process between automatic and manual operation.
-
Automatic - Manual. Manual.
Changes the mode of the bale unloading process between automatic and manual operation.
Setting Unit Minimum - Maximum Default/Advised
Full bale size:
RPC 160 V.
cm (in) 90-160 (35-63) 125
The target diameter of the bale. When the bale reaches this diameter, the warning sound tells you to stop
the tractor and automatic wrapping with net starts. When the wrapping is set to manual you must push
the start button.
Setting Unit Minimum - Maximum Default/Advised
Net wraps. Number. 1.5-10.0 2.5 (0.98)
The number of wraps around the bale.
Setting Unit Minimum - Maximum Default/Advised
Bale density. Level. 0-10 5
The level that indicates if the bale must be more dense or less dense.
Setting Unit Minimum - Maximum Default/Advised
Soft core. - On/O. O.
Selection for making bales with a soft core or not.
Setting Unit Minimum - Maximum Default/Advised
Crop type. - Straw/Hay/Silage. Hay.
The type of crop the bale is made from. The density the machine uses to build up the bale is according to
this selection.
2. Introduction
54 Baler Wrapper Combination
4900.LE.EN01
To Next Page
Loading...
Need help?
General
