50
Working with the Control Module
Printing Screens
Print Plot
In the Plot screen you can create a screen hard copy using the m (menu) key and
selecting Print Plot from the context menu. The printout will also include a legend
and the date and time.
Print Logbooks
Using the m (menu) key to show the context menu in the System screen allows you
to choose the Print Logbook function. In the following dialog you can also configure
the printer using the Setup button [F8]. The Spooler button [F7] enables you to
delete print jobs if several jobs are on the stack. Additionally you may choose the
number of copies to be printed.
In the Records screen you can choose the Print button [F6] to create a Configuration
Report including the modules’ product, serial and firmware version numbers
together with the operation time. This button is also available from the System Log,
Error Log, Main Log and EMF windows.
Print Method
The current method settings can be printed out using the Print button [F6] in the
Method screen. The print dialog as described above will appear. This will print all
method settings excluding vial range information.
Print Timetable
Pressing the m (menu) key in the Timetable screen allows you to choose Print
Timetable. This will lead to the regular print dialog.
Print Sequence
Entering the Sequence screen and pressing the m (menu) key offers the Print
Sequence option.
Print Injector Program
From the Autosampler Settings screen press the Inj. Program button [F3] to enter the
Program screen. Via the m (menu) key you have the option to print out the program.
To Next Page
Loading...
Need help?
General
