Agilent Technologies 1260 - Page 87

Agilent 1260 Infinity DAD and MWD User Manual 87
Using the Detector
5
Setting up an Analysis
Conditions
A single injection of the isocratic test standard is made under the conditions
given in Table 22 on page 87:
Tab le 22 Conditions
Flow 1.5 ml/minute
Stoptime 8 minutes
Solvent 100% (30% water/70% Acetonitrile)
Temperature Ambient
Wavelength sample 254 nm (4 nm bandwidth) reference 360 nm (100 nm bandwidth)
Injection Volume 1 µl