How to Set the Power Tunable Lasers
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave
Multichannel System, Fourth Edition
105
NOTE If you select <Both (master:2)> or <Both (master:1)> as the regulated path, both
channels output optical power. You can only view or set the parameters for the
primary optical output, for example, the high power output for
<Both (master:2)>.
Figure 65 Setting High Power parameters
Figure 66 Setting Low SSE parameter
To Next Page
Loading...
