Agilent Technologies 8163A - Setting Analysis Parameters

Applications The Stability Application
180 Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement
System, & Agilent 8166A Lightwave Multichannel System, Fourth Edition
21 Press [Analysis]. The Stability Analysis screen appears as shown in Figure 132
for the Agilent 8164A and Figure 133 for the Agilent 8163A.
Setting Analysis Parameters
22 To edit the power units used for the analysis, move to [W], press Enter, move
to <dBm>, <W>, or <dB>, and press Enter. See “What are the Power Units ?”
on page 72 for an explanation of power units.
23 To edit the reference mode used for the analysis, move to <Ref Mode>, press
Enter, move to one of the following referencing modes:
Figure 132 The Agilent 8164A Stability Analysis Screen
Figure 133 The Agilent 8163A Stability Analysis Screen - First Screen