Agilent Technologies 8163A - How to Set up a Logging Function

The Logging Application Applications
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave
Multichannel System, Fourth Edition
165
How to Set Up a Logging Function
To set up a logging function:
1 Press the Appl hardkey. The Applications menu, as shown in Figure 117,
appears.
2 Move to <Logging> and press Enter. The Agilent 8164A Logging Setup
Screen, as shown in Figure 118, or the Agilent 8163A Logging Modules Setup
Screen, as shown in Figure 119, appears depending on the mainframe
instrument you are using.
Figure 117 The Application Menu
Figure 118 The Agilent 8164A Logging Setup Screen