Agilent Technologies 8163A User Guide

Using the System Utilities Additional Information
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave
Multichannel System, Fourth Edition
65
5 Press [Close] to return to the menu in Figure 38.
6 Perform steps 3 to 5 to view information about other module slots or press
[Close] to return to the configuration menu.
NOTE • The Agilent 81640A/80A/82A/89A Tunable Laser modules will always return
HEWLETT-PACKARD as the manufacturer.
• All other Agilent 8163A Series modules return Agilent Technologies
as the manufacturer.
• The HP 8153A Series modules will always return HEWLETT-PACKARD as the
manufacturer.
See “How to Get Information About the Mainframe” on page 65 for information
on mainframe identity strings.
How to Get Information About the
Mainframe
To get information about the mainframe:
1 Press the Config hardkey.
2 Move to the <About Mainframe> menu option and press Enter. You see a box
displaying information about your mainframe, see Figure 40. The
manufacturer, part number, serial number, and firmware revision of the
mainframe are listed.
3 Press [Close] to return to the configuration menu.
Figure 40 Viewing Information About the Mainframe

Agilent Technologies 8163A Specifications

General

Brand	Agilent Technologies
Model	8163A
Category	Measuring Instruments
Language	English