Additional Information Using the System Utilities
56 Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement
System, & Agilent 8166A Lightwave Multichannel System, Fourth Edition
How to Set the Backlight & Contrast
The Backlight and Contrast menu options allow you to change the appearance of
the screen.
NOTE The Backlight and Contrast menu options are supported by the Agilent 8163A
and Agilent 8166A but not by the Agilent 8164A.
To Set the Contrast
To change the contrast level of the Agilent 8163A/6A’s screen:
1 Press the Config hardkey.
2 Move to the <Contrast> menu option and press Enter. You see a box
displaying the current setting.
3 Enter an integer value between zero and one hundred in this box and press
Enter.
To Set the Backlight
To change the backlight level of the Agilent 8163A/6A’s screen:
1 Press the Config hardkey.
Figure 30 Entering a Contrast Value
To Next Page
Loading...
