Installation and Maintenance Operating and Storage Environment
208 Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement
System, & Agilent 8166A Lightwave Multichannel System, Fourth Edition
Storage Position
The Agilent 8164A Lightwave Measurement System can be stored in its
operating position, as shown in Figure 154, or on its back legs as shown in Figure
157. The back legs protect the connectors on the back panel from damage.
CAUTION Before positioning the Agilent 8164A Lightwave Measurement System on its
back legs:
• make sure that the instrument is in stand-by mode, see page 76 and
• disconnect all connections to the back panel.
Figure 156 Correct Operating Position of the Agilent 8166A
25 mm
(1 inch)
25 mm
(1 inch)
75 mm
(3 inches)
To Next Page
Loading...
