Akuvox R29 Series Administrator's Guide

R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
162
Parameter Set-up:
 Server IP: enter the IP address of the Akuvox EC32 controller server.
 Port: enter the port of Akuvox EC32 controller server.
 Timeout: enter the lift controller timeout. For example, if you enter 30
seconds, then you have to press the floor buttons on the lift controller in
30 seconds after you, for example, swipe the card, otherwise, the floor
button will become invalid.
 User Name: enter the user name of the lift controller for the
authentication.
 Password: enter the password of the lift controller for the authentication.
 Floor NO. Parameter: enter the Floor number parameter provided by
Akuvox.
 URL To Trigger Specific Floor: enter the URL for triggering a specific floor.
 URL To Trigger All Floors: enter the URL for triggering all floors.
 URL To Close All Floors: enter the URL used for closing all floors.

Akuvox R29 Series Specifications

General

Power	PoE or 12V DC
Operating System	Android
RS485	Yes
Wiegand	Yes
Installation	Wall-mounted
Tamper-proof	Yes
Processor	Quad-Core
RAM	2GB
Display	7-Inch LCD
Camera	2MP
Network	Ethernet
Integration	SIP, ONVIF
Light compensation	Yes
Ethernet	10/100M
PoE	802.3af
Operating Humidity	10% to 90% (non-condensing)
Storage	8GB
Protocols	SIP, ONVIF, RTSP