Akuvox R29 Series Administrator's Guide

R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
36
Parameter Set-up:
 Mic Volume: adjust the volume of your voice to be heard.
 Speaker Volume: adjust the speaker volume during the call.
 Keypad Volume: adjust the volume for the button touch sound.
 Tamper Alarm Volume: set the tamper alarm volume.
 Prompt Volume: set the prompt volume.
In addition, Call Volume can be configured on the web Phone > Call Feature >
Others interface to allow you to adjust the volume when you are answering
the call.
Note:
 When the Call volume on the above web interface is enabled, you are
allowed to adjust the call volume during the call session.
7.11.2. Open Door Tone Configuration
You can enable or disable various types of Open Door Tones on web Phone >
Audio > Open Door Tone Setting interface.

Akuvox R29 Series Specifications

General

Power	PoE or 12V DC
Operating System	Android
RS485	Yes
Wiegand	Yes
Installation	Wall-mounted
Tamper-proof	Yes
Processor	Quad-Core
RAM	2GB
Display	7-Inch LCD
Camera	2MP
Network	Ethernet
Integration	SIP, ONVIF
Light compensation	Yes
Ethernet	10/100M
PoE	802.3af
Operating Humidity	10% to 90% (non-condensing)
Storage	8GB
Protocols	SIP, ONVIF, RTSP