R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
14. Monitor and Image
14.1.Mjpeg Image Capturing
R29 series allows you to capture the Mjpeg format monitoring image if
needed. You can enable the Mjpeg function and set the image quality on the
web Intercom > RTSP > Mjpeg interface.
Parameter Set-up:
Enable: enable or disable the Mjpeg service.
Image Quality: select the quality for the image capturing among seven
options: QCIF, QVGA, CIF, VGA, 4CIF, 720P, 1080P.
After the Mjpeg service is enabled, you can capture the image from the door
phone using the following three types of URL format:
http:// device ip:8080/picture.cgi
http://device ip:8080/picture.jpg
http://device ip:8080/jpeg.cgi
For example, if you want to capture the jpg format image of the door phone
with the IP address:192.168.1.104, you can enter
“http://192.168.1.104:8080/picture.jpg” on the web browser.
14.2.Live Stream
If you want to check the real-time video from the R29 series door phone, you
can go to the device web Intercom > Live Stream interface to obtain the
real-time video or you can also enter the correct URL on the web browser to
To Next Page
Loading...
Need help?
General
