Name: Akuvox R29 Series
Brand: Akuvox
Rating: 4 (1 reviews)

To Next Page

To Previous Page

R29X Door Phone Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

101

 Rssi Threshold: select the signal receiving strength from -85~-50db in

absolute terms, The higher value it is, the greater strength it has. The

default value is 72db in absolute terms.

 Open Door Interval (Sec): select the time interval between every two

Bluetooth door accesses.

12.10.2. Unlock by HTTP Command on Web Browser

You can unlock the door remotely without approaching the device physically

for the door access by typing in the created HTTP command (URL) on the

web browser Intercom > Relay > Open Relay via HTTP to trigger the relay

when you are not available by the door for the door access.

Parameter Set-up:

 Enable: enable the HTTP command TO unlock function by clicking on

Enable field.

 Session Check: enable it to protect data transmission security.

 UserName: enter the user name of the device web interface, for example,

“Admin”.

 Password: enter the password for the HTTP command. For example,

“12345”.

Please refer to the following example:

Akuvox R29 Series Specifications

General

Akuvox R29 Series Administrator's Guide

Other manuals for Akuvox R29 Series