R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
14.3.RTSP Stream Monitoring
R29 series support the RTSP stream that allows intercom devices such as an
indoor monitor or the monitoring unit from the third party to monitor or
obtain the real time audio/ video (RTSP stream) from the door phone using
the correct URL.
14.3.1. RTSP Basic Setting
You are required to set up RTSP function on device web Intercom > RTSP >
RTSP Basic interface in terms of RTSP Authorization, authentication and
password, etc., before you are able to use the function.
Parameter Set-up:
Enabled: enable the RTSP if needed.
RTSP Authorization: enable or disable the RTSP authorization. If you
enable the RTSP Authorization, you are required to enter RTSP
Authentication Type, RTSP Username, RTSP Password on the intercom
device such as an indoor monitor for authorization.
Authentication Mode: select RTSP authentication type between “ Basic”
and “ Digest”. “Basic “ is the default authentication type.
User Name: enter the name used for RTSP authorization.
Password: enter the password for RTSP authorization.
To Next Page
Loading...
Need help?
General
