Akuvox R29 Series Administrator's Guide

R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
49
Parameter set-up:
 Status: check to see if the SIP account is registered or not.
 Account Enabled: click “Enable” or “Disable” to activate or deactivate the
registered SIP account.
 Display Name: configure the name, for example, the device’s name to be
shown on the device being called to.
 User Name: enter the user name obtained from the SIP account
administrator.
 Account: select the exact account (Account 1&2) to be configured.
 Display Label: configure the device label to be shown on the device
screen.
 Register Name: enter the SIP account register Name obtained from the
SIP account administrator.
 Password: enter the password obtained from the SIP account
administrator.
9.2.2.SIP Call DND&Return Code Configuration

Akuvox R29 Series Specifications

General

Power	PoE or 12V DC
Operating System	Android
RS485	Yes
Wiegand	Yes
Installation	Wall-mounted
Tamper-proof	Yes
Processor	Quad-Core
RAM	2GB
Display	7-Inch LCD
Camera	2MP
Network	Ethernet
Integration	SIP, ONVIF
Light compensation	Yes
Ethernet	10/100M
PoE	802.3af
Operating Humidity	10% to 90% (non-condensing)
Storage	8GB
Protocols	SIP, ONVIF, RTSP