Name: Akuvox R29 Series
Brand: Akuvox
Rating: 4 (1 reviews)

To Next Page

To Previous Page

R29X Door Phone Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

8.Network Setting

8.1. Device Network Connection Setting

You can check for the door phone’s network connection info and configure

the default DHCP mode (Dynamic Host Configuration Protocol) and static IP

connection for the device either on the device or on the device web interface.

To check and configure the network connection on the device Setting screen.

Parameter Set-up:

 DHCP: select the DHCP mode by checking off the DHCP box. DHCP mode

is the default network connection. If the DHCP mode is selected, then the

door phone will be assigned by the DHCP server with IP address, subnet

mask, default gateway, and DNS server address automatically.

 Static IP: select the static IP mode by checking off the DHCP square box.

When static IP mode is selected, then the IP address, subnet mask,

default gateway, and DNS servers address have to be manually

configured according to your actual network environment.

Akuvox R29 Series Specifications

General

Akuvox R29 Series Administrator's Guide

Other manuals for Akuvox R29 Series