R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Web Relay Extension: enter the relay extension information, which can be
a SIP Account user name of an intercom device such as an indoor
monitor, so that the specific action command will be sent when unlock is
performed on the intercom device, while this setting is optional. And
please refer to the example below:
http://admin:admin@192.168.1.2/state.xml?relayState=2.
12.3.Door Access Schedule Management
You are required to configure and make a schedule for the user-based door
access via RF card, Private PIN and Facial recognition.
12.3.1. Manage Relay Schedule
Set the corresponding relay always open at a specific time. This feature is
designed for some specific scenarios, for example, the time after school, or
for morning work time. To do the configuration on the web Intercom
Relay > Relay Schedule interface.
Parameter Set-up:
Relay ID: choose on the relay you need to set up.
Schedule Enabled: it is disable by default. Only choose to enable it, and
you can select the schedule. For creating the schedule, please refer to the
door access schedule configuration.
12.3.2. Configure Door Access Schedule
You can create door access schedules so that they can be later conveniently
applied to the door access control intended for the individual users or a
group of users created. Moreover, you can edit your door access schedule if
To Next Page
Loading...
Need help?
General
