Akuvox R29 Series Administrator's Guide

Name: Akuvox R29 Series
Brand: Akuvox
Rating: 4 (1 reviews)

187 pages

To Next Page

To Previous Page

R29X Door Phone Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

Parameter Set-up:

 IC/ID Card Display Mode: select the card format for the ID Card for the

door access among five format options: 8H10D; 6H3D5D(W26); 6H8D;

8HN; 8HR. The card code format is 8HN by default in the door phone.

12.7.3. IC/ID Card Control

You can enable or disable the IC and ID card function if needed. You can

navigate to Intercom > Card Setting > Card Type Support.

12.7.4. NFC and Felica Card Setting

NFC and Felica card are the two types of cards that need to be enabled

before you can use them as these two types of cards are not so frequently

used as opposed to the conventional RF card such as IC cards and ID cards.

To enable or disable the cards on the device web Intercom > Card Setting

interface.

Other manuals for Akuvox R29 Series

Need help?

Do you have a question about the Akuvox R29 Series and is the answer not in the manual?

General