R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Time settings can be set up on the device and on the device web interface in
terms of time zone, date and time format, etc.
6.2.1.Time Setting on the Device
To set up time settings on the device Time interface.
Parameter Set-up:
Automatic Date: Automatic Date is switched on by default, which allows
the date& time to be automatically set up and synchronized with the
default time zone and the NTP server (Network Time Protocol). You can
also set it up manually by checking off the square box and then entering
the time and date you want before pressing the Save tab for the
validation.
Time Zone: select the specific time zone depending on where the device
is used and then press Confirm tab for the confirmation. The default time
zone is GMT GMT+0.00.
Date Format: select the date format as you like among three format
options: “M-D-Y”; “D-M-Y”; “Y-M-D” and then press the Confirm tab for
the confirmation.
Time Format: you can either select 12 hour or 24 hour time format as you
like, and then press the Confirm tab for the confirmation.
To Next Page
Loading...
Need help?
General
