R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Parameter Set-up:
Lock Type: select “Positive” for the lock that unlocks when the power is
on and select “Negative” for the lock that unlocks when the power is off.
Lock Delay: select door unlock delay time after you are granted the door
access. The delay time range is from “0-10” seconds.
Magnetism Type: select “OFF” if you want to disable the door sensor and
alarm. To set alarm trigger type, you must select “ON-ALARM” and
“OFF_ALARM” according to the type of lock you applied. Select
“ON_ALARM” for a positive lock, while selecting “OFF_ALARM” alarm for
a negative lock.
Magnetism Type: select the alarm delay time after its being triggered.
The delay range is from “10-120” seconds.
13.3.Client Certificate Setting
Certificates can ensure communication integrity and privacy when deploying
Akuvox door phones. So, when a user needs to establish SSL protocol, it is
necessary to upload corresponding certificates for verification.
Web Server Certificate: it is the certificate that sends to clients for
authentication when clients require an SSL connection with Akuvox door
To Next Page
Loading...
Need help?
General
