Name: Akuvox R29 Series
Brand: Akuvox
Rating: 4 (1 reviews)

To Next Page

To Previous Page

R29X Door Phone Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

119

Parameter Set-up:

 Interval: IR detector receives an event, delays the number of seconds set

by interval before triggering motion. When triggering, it will determine

whether the time when the IR received the event is within 3 seconds from

the time when the trigger was triggered. Interval is 0 second, it will not

trigger motion. If the interval is 1-3 seconds, as long as the image

movement is detected once in front of the IR detector, motion will be

triggered. If interval time is over 3 seconds, for example, the interval is

10s, after the image movement is detected in front of the IR detector, the

image movement is detected again within 7s-10s, that is, motion is

triggered.

13.4.2. Motion Detection Setting on the Web Interface

On the device web Intercom > Motion > Motion Detection Options interface,

you can not only configure the time interval but also the motion detection

sensitivity and notification type when the motion detection action is

triggered.

Akuvox R29 Series Specifications

General

Akuvox R29 Series Administrator's Guide

Other manuals for Akuvox R29 Series