R29X Door Phone Administrator Guide
AKUVOX SMART INTERCOM www.akuvox.com
Parameter Set-up:
Suspicious Moving Object Detection: select “disable” to disable the
motion detection. Select “IR detection” to enable the IR sensor based
motion detection for the suspicious moving objects. And select “Video
detection” to enable the video-based motion detection during the
monitoring for the suspicious moving object.
Time Interval: set the time interval in the same way as you do on the
device.
Detection Accuracy: set the detection accuracy for the detection
sensitivity. The smaller value it is, the greater sensitivity. the default
detection accuracy value is “20”.
Action To Execute: select the notification type: FTP, Email, SIP Call,
HTTP,TFTP. For example, If you select “FTP” then the notification will be
sent in FTP to a designated serve while if you select “Email” then the
notification will be sent in the form of emails when motion detection
action is triggered.
Action relay: select the relay to be triggered when a suspicious object is
detected in the motion detection. Select “none” and no relay will be
triggered.
The Width of Detected Area/The Height of Detected Area : The full size of