Allen-Bradley ControlLogix 1756-ENBT - Page 12

Publication 1756-UM050A-EN-P - December 2001
Table of Contents ii
Using RSLinx Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7
Using a Third Party BootP Server . . . . . . . . . . . . . . . . . . . . . 4-10
Using DHCP Software to Configure Your Module . . . . . . . . . 4-12
What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12
Chapter 5
Using Rack Optimized I/O
About the Example Application . . . . . . . . . . . . . . . . . . . . . . . 5-1
Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Create the Example Application . . . . . . . . . . . . . . . . . . . . . . . 5-3
Add the Local Ethernet Bridge to the I/O Configuration . . . 5-4
Add the Remote Ethernet Bridge to the I/O Configuration . 5-6
Add the Remote I/O Modules to the I/O Configuration . . . 5-8
Add the Remote Digital Input Module . . . . . . . . . . . . . 5-8
Add the Remote Digital Output Module . . . . . . . . . . . 5-10
Edit the Controller Tags . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Create the Ladder Program . . . . . . . . . . . . . . . . . . . . . . . 5-14
Download the Program to the Controller . . . . . . . . . . . . . 5-15
Test the Example Application . . . . . . . . . . . . . . . . . . . . . . . . 5-16
What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Chapter 6
Using Analog I/O with Direct
Connection
About the Example Application . . . . . . . . . . . . . . . . . . . . . . . 6-1
Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Create the Example Application . . . . . . . . . . . . . . . . . . . . . . . 6-3
Add the Remote Analog I/O Module
to the I/O Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Edit the Controller Tags . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Modify the Ladder Program. . . . . . . . . . . . . . . . . . . . . . . 6-10
Download the Program. . . . . . . . . . . . . . . . . . . . . . . . . . 6-11
Test the Example Application . . . . . . . . . . . . . . . . . . . . . . . . 6-12
What’s Next? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-12
Chapter 7
Using Produced
and Consumed Tags
About the Example Application . . . . . . . . . . . . . . . . . . . . . . . 7-1
Set Up the Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2
Create the Producer Application . . . . . . . . . . . . . . . . . . . . . . . 7-3
Create the Producer Tags . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Create the Producer Ladder Program . . . . . . . . . . . . . . . . . 7-6
Download the Producer Application . . . . . . . . . . . . . . . . . 7-7
Create the Consumer Application . . . . . . . . . . . . . . . . . . . . . . 7-8
Create the Consumer Controller. . . . . . . . . . . . . . . . . . . . . 7-8
Add the Producer to the Consumer’s I/O Configuration . . . 7-9
Add the Local Ethernet Bridge to the I/O Configuration 7-9
Add the Remote Ethernet Bridge
to the I/O Configuration . . . . . . . . . . . . . . . . . . . . . . 7-11
Add the Remote (Producer) Controller
to the I/O Configuration . . . . . . . . . . . . . . . . . . . . . . 7-13