Publication 1756-UM050A-EN-P - December 2001
4-8 Configuring the 1756-ENBT Module
The RSWho window will open.
3. Select the appropriate driver (e.g., AB_KT-1 for Data Highway Plus,
AB_KTC-1 for ControlNet, or AB_DF1-1 for the Logix 5550’s serial
port).
The following example uses the AB_DF1-1 driver. You can perform
the same steps using one of the other drivers.
4. Expand the driver tree through the backplane of the chassis
containing the 1756-ENBT module and right click on the module.
To Next Page
Loading...
