Operating
122
Operating
0000010038-003- GB
Adjustment:
• Press the + or - button to change the dimension.
• Enter the dimension on the numerical keypad and press the START button.
Calibrating the scoring saw
• Select the saw blade position to be calibrated with button 2, 3 or 4; the
symbol of the selected position will be shown in inverse format.
• Press the Cal button on the function keypad for longer than 1 sec. CAL will
appear on the screen for the selected position, with the current value in
inverse format.
• Enter the value and press the Cal button; the entered value will be shown
on the display.
i
Note!
The positions given for the saw blade sides are guide figures only.
To Next Page
Loading...
