Transport, siting and installation
65
0000010038-003- GB
Transport, siting and installation
The rear stop is fastened with two screws in the clamping piece.
Fig. 5-27 Installing the top carriage
[1] Carefully push on the top carriage making sure it is not skewed, watch the e-chain.
[2] Carefully push the guide rails onto the double rollers.
[3] Push the top carriage towards the left, all the way to the stop.
Fig. 5-28 Back stop
[1] Back stop
[2] Clamping piece for rear stop
To Next Page
Loading...
