Anritsu MX269018A - Page 118

Chapter 3 Measurement
3-76
AF3 – AF3 Tone Frequency
■
Summary
Sets the Tone frequency of AF3 signal source.
This setting is enabled when the MS2830A-018/118 is installed.
■
Setting range
20.0 to 40000.0 Hz
AF3 – AF3 Tone Deviation (FM)
■
Summary
Sets the Deviation of AF3 signals.
Displayed when the MS2830A-018/118 is installed and Modulation
is set to FM.
■
Setting range
0.0 to 100000.0 Hz
AF3 – AF3 Tone Radian (

M)
■
Summary
Sets the Deviation of AF3 signals.
Displayed when the MS2830A-018/118 is installed and Modulation
is set to

M.
■
Setting range
0.00 to 50.00 rad
However, the setting range is limited to within the range
which meets the following formula.
(AF3 Tone Frequency

AF3 Tone Radian) < 100k
AF3 – AF3 Tone Depth (AM)
■
Summary
Sets the AM modulation index of AF3 signal.
Displayed when the MS2830A-018/118 is installed and Modulation
is set to AM.
■
Setting range
0 to 100%
Auto Set
■
Summary
Selects whether to allow value change in the dialog box without
determining by the Set key .