10
Telephone operation
Basic phone operation
Continued from previous page
Handset
To make a call:
Lift the handset.
Dial a number.
To override automatic line selection, press the
LINE button for the line you wish to select, then
lift the handset.
To answer a call, lift the handset.
To hang up, place the handset on the telephone
base.
Speakerphone
To make a call:
Press and release the desired LINE button or
[ SPEAKER]. The SPEAKER light goes on.
Wait for a dial tone, then dial the number.
To answer a call, press [ SPEAKER] or press
the LINE button of the incoming call.
To end the call, press [ SPEAKER].
NOTES:
If HEADSET is programmed as the default
mode (see AUTOMATIC MODE on page 39
of the installation guide), you must press [
SPEAKER] to activate the speakerphone.
If SPEAKERPHONE is selected in the
AUTOMATIC MODE menu, pressing any line key
selects the line and activates the speakerphone.
If HEADSET is selected in the AUTOMATIC
MODE menu (page 39 of the installation guide)
and a headset is connected, pressing any LINE
key selects the line and activates the headset.
Continued on next page
•
1.
2.
•
•
•
•
1.
2.
•
•
•
•
To Next Page
Loading...
Need help?
General
