AT&T 1080 User Manual

69
Answering system operation
DTAD setup
CALL SCREENING
Use this feature to choose whether incoming
messages can be heard over the speaker when
they are being recorded. If you turn call screening
on, you hear the incoming private message on
your telephone when a call comes in.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see DTAD SETUP.
Press [ENTER].
3. Press
[ ] or [ ] until you see CALL
SCREENING.
4. Press
[ ] or [ ] to choose ON or OFF.
5.
To move to the next feature, press [ ].
-OR-
To exit setup, press and hold [ENTER].
NOTE: If the Do Not Disturb (DND) feature
is active (page 15), the call screening feature is
disabled.
DTAD INTERCEPT
Use this feature to choose whether private
incoming messages can be intercepted by other
phones. Someone at the 1080 phone that is
recording the message can always intercept the
call. If DTAD intercept is on when a caller leaves a
message, someone on another system telephone
sharing the same line can answer the call by
pressing the corresponding line key.
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see DTAD SETUP.
Press [ENTER].
3. Press
[ ] or [ ] until you see DTAD INTERCEPT.
4. Press
[ ] or [ ] to choose ON or OFF.
5.
To move to MAIN MENU, press [ ].
-OR-
To exit setup, press and hold [ENTER].
DTAD SETUP
ON
CALL SCREENING
DTAD SETUP
ON
DTAD INTERCEPT

AT&T 1080 Specifications

General

Brand	AT&T
Model	1080
Category	Telephone
Language	English