EasyManua.ls Logo

AT&T 1080 - Call Transfer; Transfer a Call; Blind Transfer

AT&T 1080
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Telephone operation
Call transfer
Transfer a call
Use this feature to transfer a call to any other
system phone. Once you transfer a call, it can be
picked up at any other system phone, not just at
the extension you called.
NOTE: If a transferred call is not picked up
within 20 minutes, the phone automatically
disconnects the call.
Blind transfer
Use this feature to make a blind transfer. While on
a call:
1. Press
[TRANSFER]. The outside call is
automatically put on hold. TRANSFER LINE#Y TO
(with Y being the line in use) appears on the third
line of the display.
2. Press the one-touch button for the destination
extension.
-OR-
Dial the destination extension number to which
you’re transferring the call. The extension
number appears on the fourth line of the
display.
3. Hang up.
Your phone reminds you with a double-beep every
30 seconds when a transferred call has not been
answered. (To turn off the reminder beep, see
HOLD REMINDER on page 36 of the installation
guide.)
NOTE: If you do not dial an extension within
10 seconds, the transfer automatically cancels.
The call is still on hold. Press the corresponding
LINE key to resume the call.
10:01AM 11/23
EXT 11
TRANSFER LINE #1
TO 12
10:01AM 11/23
00:30
10:01AM 11/23
00:30
TRANSFER LINE#1
TO

Table of Contents

Other manuals for AT&T 1080

Related product manuals