AT&T 1080 - Redial Stack

17
Telephone operation
Basic phone operation
Redial stack
Use this feature to review the numbers in the
redial memory and dial one if you wish. (The
last six numbers dialed from this extension are
automatically stored in the redial memory stack.)
1. When the phone is idle, press
[(AUTO) REDIAL].
2. Press [ ] or [ ] to scroll through the last six
numbers dialed at this extension.
3. When the desired number displays, press
[ENTER] twice to dial the call.
NOTE: While reviewing the numbers in the redial
stack, if you want to place a new call other than
the displayed number, you need to press and hold
[ENTER], or wait for 30 seconds to return to idle.
• To delete a redial number, press [REMOVE]
while the redial number displays.
• To store a redial number in a one-touch key:
1. While the number displays, press [ENTER].
2. Press
[ ] or [ ] until you see COPY TO 1-
TOUCH. Press [ENTER].
3. Press a one-touch key or press
[LOWER], then
a one-touch key (page 56).
• To store a redial number in the directory:
1. While the number
displays, press [ENTER].
2. Press
[ ] or [ ] until you see COPY TO DIR.
Press [ENTER].
3. Enter the name (page 43).
4. Press
[ENTER] twice.
• To exit, press [(AUTO) REDIAL].
NOTE: If the desired
redial number is longer
than 16 digits, the screen
only displays the first 14
digits.