29
Intercom operation
Voice page
Page a specific extension (single-phone page)
Use this feature to send your voice to the speaker
of the destination phone. The person you’ve called
might be able to respond just by talking. See
AUTO MUTE on page 35 of the installation guide.
1. Press [INTERCOM].
2. Press
[ENTER] to select PAGE.
3. Enter the destination extension number (11-26).
4. Your telephone displays
PAGE and the called
extension number. Now the speakerphone
on the destination telephone is activated
automatically.
To end the page:
• Press [INTERCOM] on either telephone.
NOTES:
• Refer to page 32 of the installation guide to get
more information on extension numbers.
• Pressing [INTERCOM] while on an external call
initiates a call transfer (page 24).
• If the destination telephone is in the Do Not
Disturb mode, on an intercom call or on an
outside call, your telephone sounds a busy
signal.
• The auto-mute feature might be set to ON on
the destination telephone to protect privacy
(page 35 of the installation guide). The person
at the destination extension must press [MUTE]
to re-activate the microphone (page 19).
10:01AM 11/23
EXT 11
PAGING
INTERCOM
10:01AM 11/23
EXT 11
PAGE 12
10:01AM 11/23
EXT 11
INTERCOM TO
PAGE
To Next Page
Loading...
Need help?
General
