AT&T 1080 - DTAD Setup; To Turn the Private Message Answering System on or off; Answer Status

65
Answering system operation
DTAD setup
See DTAD setup in Feature Setup on pages 57-
62 in the installation guide to set up the DTAD
function.
To turn the private message answering system
on or off
The answering function of this phone is
programmable. See ANSWER STATUS below for
programming instructions.
ANSWER STATUS
Use this feature to set up the 1080 phone
to record private messages (not the SYS EXT
messages meant for the associated 1070 and
1040 phones).
1. Press
[ENTER].
2. Press
[ ] or [ ] until you see DTAD SETUP.
Press [ENTER]. The screen displays ANSWER
STATUS.
3. Press
[ ] or [ ] to choose ON to turn the
answering system on, or OFF to turn the
answering system off.
4.
To move to the next feature, press [ ].
-OR-
To exit setup,
press and hold [ENTER].
NOTE: If the ANSWER STATUS setting is
OFF, the answering system of the auto attendant
telephone can still record central messages and
system extension messages.
DTAD SETUP
ON
ANSWER STATUS
DTAD SETUP
ON
ANSWER STATUS