25
Intercom operation
Intercom overview
This 1080 telephone is fully compatible with any AT&T Four-Line Small
Business System Speakerphone 1070 or 1040 phones you might have installed.
You can use a total of 16 1080/1070/1040 phones together as extensions in
your phone system.
Each individual phone in your telephone system MUST be assigned a unique
extension number for the intercom feature to work. See EXTENSION NUMBER
on page 32 of the installation guide for instructions.
This intercom features both a single-phone page and a system-wide page
(PAGE ALL).
A single-phone page alerts only one phone. A system-wide page (PAGE ALL)
alerts all system phones. Any phone with the Do Not Disturb (DND) feature
activated does not receive the page.
An intercom call rings at the destination extension with a repeating double-ring
pattern.
A single-phone page automatically activates the speakerphone on the receiving
phone. You can deactivate the speakerphone by lifting the handset.
NOTES:
If a line is in use, pressing [INTERCOM] places the line on hold and
activates the intercom (page 24).
If you subscribe to DSL service, please read the section on Important
information for DSL users beginning on page 6 of the installation guide
for information about minimizing problems with this phone caused by DSL
signals.
•
•
Lets any two extensions connected to line 1 ring
each other (page 26).
Operation:
Basic intercom operations
Function:
INTERCOM
Lets you announce over the speaker of the desti-
nation phone (page 29).
PAGE
Lets you announce to all phones in the system at
the same time (system-wide page) (page 31).
PAGE ALL
Lets you connect an intercom call with an
outside line (page 33).
CONFERENCE
To Next Page
Loading...
