AT&T 1080 - Make an Intercom Call with the Speakerphone or Headset

27
Intercom operation
Intercom
Make an intercom call with the speakerphone or
headset
Use this feature to make an intercom call. With
the handset in the telephone base:
1. If the one-touch preference is set to
INTERCOM,
skip to step 2.
-OR-
If the one-touch preference is set to
TELEPHONE, press [INTERCOM]. The phone
automatically activates the intercom call in
the mode (headset or speakerphone) you
programmed (see AUTOMATIC MODE on page
39 of the installation guide).
2. Press the one-touch button. The screen displays
INTERCOM TO and the destination extension.
If the destination extension is idle or set to Do
Not Disturb, you hear long beeps. If the other
extension is busy, you hear a busy signal.
NOTE: The intercom call automatically cancels
if you do not press a one-touch button within 10
seconds.
10:01AM 11/23
EXT 11
INTERCOM TO
PAGE
10:01AM 11/23
EXT 11
INTERCOM TO 12