77
Answering system operation
Remote access
Use the remote access feature to access your
answering system from any touch-tone telephone
on a different telephone line (away from your
home). A three-digit security code is required. This
code is pre-set at 111; see REMOTE CODE (page
59 of the installation guide) to change it.
1. Dial your telephone number from any touch-
tone telephone.
2. When the answering system answers, enter the
three-digit remote access code (111 unless you
have changed it).
3. Enter the remote commands (see list on next
page).
NOTE: If there is no command entered for 10
seconds, "Remote operation" will be announced. If
there is no command entered for another 10 sec-
onds, the call ends automatically.
4. Hang up to end the call and save all undeleted
messages.
To Next Page
Loading...
