AT&T 1080 - Room Monitor; Make an Intercom Conference Call

33
Intercom operation
Voice page
Room monitor
Use this feature to monitor a room. Make a single-
page call to a system phone to monitor the
sounds from that room. To use this feature, the
destination telephone auto-mute feature must be
turned off (page 35 of the installation guide).
Press [INTERCOM].
Press [ENTER] to select PAGE.
Enter the destination extension number (11-26).
After your telephone displays PAGE and the
destination extension number, press [MUTE].
The destination telephone beeps, then activates
its speakerphone automatically. Now, you can
monitor the room of the destination telephone
without being heard.
To end room monitoring, press [INTERCOM] on
your telephone.
Make an intercom conference call
Use this feature to invite someone at an extension
to join an existing conversation. Someone at a
system phone having a two-way conversation on
an outside line can invite someone at an extension
to join the conversation. Follow the directions
under Conference calls on page 22, making sure
to establish the non-intercom call first.
NOTE: You cannot put an intercom conference
call on hold.
1.
2.
3.
4.
10:01AM 11/23
EXT 11
PAGING
INTERCOM
10:01AM 11/23
EXT 11
PAGE 12